Home > Respiratory Therapy > Respiratory Supplies >

DISCONTINUED - Check O2 Plus Oxygen Analyzer Unit - IRC450

Invacare™ Check O2 Plus Oxygen Analyzer Unit to Test Concentrator Flow Rate Level Accuracy - IRC450
Invacare™ Check O2 Plus Oxygen Analyzer Unit to Test Concentrator Flow Rate Level Accuracy - IRC450
  
Invacare™ Check O2 Plus Oxygen Analyzer Unit to Test Concentrator Flow Rate Level Accuracy - IRC450
Our Price: $1,675.97

Stock Status:In Stock

Availability:: Currently Unavailable
Product Code: IRC450
Qty:

Description
 

Invacare™ Check O2 Plus Oxygen Analyzer Unit to Test Concentrator Flow Rate Level Accuracy - IRC450

Invacare Check O2 Plus Oxygen Analyzer (Invacare IRC450 replaces IRC400) is an efficient and cost-effective tester designed with technicians in mind. It includes the connection to make three separate checks: 1) oxygen purity concentration percentage, 2) flow rate in liters per minute, and 3) oxygen outlet pressure (psi/kPa) on any home or portable Oxygen Concentrator. This Oxygen Analyzer is very low maintenance and never needs to be calibrated. This tester features simple, two button operation. The device is powered by two AA batteries that provide over 16,000 readings before they need replacing or recharging. the Invacare oxygen analyzer is very efficient and will even shut off automatically after four minutes to extend battery life.
What is in the box
  • O2 Analyzer
  • Gas Sample Tubing
  • Soft Protective Cover
  • User Manual
Components Description
  • 3 1/2 Digit Display — LCD provides direct readout of oxygen concentration, gas flow and gas pressure. The LCD also displays error codes as necessary.
  • ON/OFF Button — Turns the unit on or off.
  • Mode Button — Switches between measuring the concentration of gas produced by a concentrator and pure oxygen (for calibration verification).
  • Low Battery Indicator — Indicates the voltage of the batteries is below normal operating levels.
  • LPM — Illuminated next to the flow measurement. (not shown when in calibration verification mode)
  • kPA — Indicates the pressure measurement in units of kilopascals.
  • PSI — Indicates the pressure measurement in units of pounds per square inch.
  • “%” symbol — Illuminated next to the concentration measurements.
  • Inlet Port — Used to receive the gas sample.
  • Outlet Port— Used as an outlet for the gas sample and as a trigger for pressure measurement when occluded.
  • Oxygen Tubing — Used to connect to gas sample port.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Respiratory Therapy > Respiratory Supplies