Chattanooga Hydrocollator E-2 Stationary Heating Unit

• Chattanooga Hydrocollator E-2 Stationary Heating Unit is simple to fill and drain
• Thermostatically controlled temperature
• No plumbing is required
• It includes:
• - 2 oversize
• - 1 neck contour
• - 3 standard size hotPacs

• - The thermostat is extremely sensitive and the slightest adjustment will alter the temperature several degrees
• - The temperature of the water should be checked with a thermometer after every adjustment, before using the HotPacs
• - The recommended operating temperature is 160°F to 166°F (71°C to 74°C)
• - Always keep the water level over the top of the HotPacs to avoid burning or scorching of the packs
• - Never allow the HotPacs to dry after use Check water level daily as it has a natural loss due to evaporation
• - Do not move the Hydrocollator while filled with water
• - Tipping over could result in burns to the user or others
• - Always unplug the Hydrocollator from the power source before attempting to empty water from unit
• - Make certain the unit is electrically grounded by plugging into a hospital grade electrical outlet with a ground terminal receptacle (U-ground outlet), 120 VAC only
• - Always replace Hydrocollator HotPacs as soon as they show signs of wear