Torbot Solvent Adhesive Remover

• Removing Appliances -Saturate a ball of cotton or use an eyedropper and apply a few drops of solvent at the top of disc between it and skin. Gently pulling the disc away from the body as the solvent penetrates down between the disc and skin. Apply more as needed until removal is achieved
• Thinning Cement - If Torbot Bonding Cement should become too thick, it can be thinned by adding up to 2oz. of Torbot Solvent per 4oz. can of cement. Add 1/2 ounce at a time and allow to sit for at least 8 hours. Mix well
• Cleaning Cement From Skin - Saturate a cotton ball or gauze with Torbot Solvent. Rub over cement until cement begins to loosen. Rub with a clean dry cloth. Follow same procedure for removing accumulated cement or solvent based adhesives from pouches or discs